Hanrun Transfer Paper Co., Ltd.: How to clean the ink path?

Friday, March 29, 2019

How to clean the ink path?

note:
1. It is necessary to select the correct corresponding cleaning solution according to the ink type. If the cleaning solution is incorrectly selected, it will cause damage to the printer.
2. This article is for reference only. Please confirm that your machine's ink path construction is suitable for this method before operation.
3. Make sure the printer is in the power-off state during operation. When it is involved in the operation of the ink bag, do not spill liquid on the print head.

Ink Cleaning

Steps:
1. Remove the ink cartridge from the machine, pour the ink from the cartridge and clean it with a cleaning solution (or replace it with a new one).

2. Locate the ink bag and use a syringe to draw ink from the ink bag until the ink cannot be withdrawn.

3. Pour a clean empty cartridge into the appropriate amount of cleaning solution and insert it into the machine.
4. Using a syringe to draw the cleaning solution from the ink bag, repeat the operation until the ink bag is filled with the cleaning solution.
5. Wait for a period of time after the entire ink path is filled with the cleaning solution, so that the cleaning liquid can better clean the ink bag and the ink tube.
6. First remove the ink cartridge from the machine, then use the syringe to draw the cleaning solution through the ink bag, and finally install the ink bag.

7. Remove the ink cartridge to check for residual cleaning fluid, clean the residual cleaning fluid from the cartridge, inject the ink, and put it into the machine.
8. Select the maintenance item through the machine's control menu for deep cleaning, cleaning several times, and then print the nozzle check. When the satisfactory effect nozzle check pattern is used, normal print operation can be performed.